Huvudsida
Block
Böcker
Dataloggers
Drivlina
Everlast Welding
Förvaring, sortering
Gängverktyg
Handverktyg
Kam
Kläder
Kolvar
Kolvringar
Lampor - Fiberoptik
LSM Products
Lufttrycksmätare
Lyftare
MaxJet munstycken
Mätinstrument
Oljefilter
Oljepump
Pit Pal
Rostfria buntband (strips)
Slip, Portning
Smörjmedel
Stativ - mätinstrument
Stötstänger
Svetsar, CEA
Toppar
Tuningverktyg
Tändinställningslampor
Tändstift
Ventiler
Ventilfjädrar
Ventilkåpor
Vevaxel
Vevstakar
Vågar
Ventilfjädrar
ProduktnrBeskrivningPris inkl. moms
100058
Valve Spring Tester, INTERCOMP

  • Portable Digital Force & Travel Indication
  • Peak Hold Feature Saves Maximum Reading
  • Excellent for Valve, Clutch, Shock & Pressure
  • Relief Springs up to 2" (50mm) in Diameter
  • Readout in 0.2lb (kg) Increments
  • Backlit for Night Use
  • Standard 9-Volt Battery Operation

Accuracy: ±0.25% of reading
Capacity: 1,000lb (500kg)
Travel: 4" (100mm

Pris inkl. moms 8,400.00 Kr
POW101325
Checking Springs, Set Of 8
Our set of low tension Checking Springs can be installed by hand in place of your valve springs to simplify measuring piston to valve clearance, rocker arm ratio, cam degreeing, etc. This set of eight springs is enough for one head and definitely qualifies as low cost insurance.

Pris inkl. moms 169,00 Kr
POW351005
Spring Compressor Stand for 361015
This is the stand for the Heavy-Duty Manual Valve Spring Compressor.
Pris inkl. moms 915,00 Kr
POW351006
Pro Valve Lock Tool - 5mm, 5.5mm, and 6mm
We all know how scary it can be to install or remove valve locks with just your fingers. One slip and you're looking at one painful injury. This new tool is definitely the best we've seen for performing this delicate task. To install keepers, compress valve spring, place valve locks on the magnetic stem of the tool, push body of tool over the locks, and position them on the valve stem and release the valve spring. To remove keepers, use the magnetic stem to pluck off the valve locks once the valve spring is compressed. We offer several sizes that cover most automotive and motorcycle applications.
Pris inkl. moms 439,00 Kr
POW351007
Pro Valve Lock Tool - 7mm, 8mm, and 5/16"
We all know how scary it can be to install or remove valve locks with just your fingers. One slip and you're looking at one painful injury. This new tool is definitely the best we've seen for performing this delicate task. To install keepers, compress valve spring, place valve locks on the magnetic stem of the tool, push body of tool over the locks, and position them on the valve stem and release the valve spring. To remove keepers, use the magnetic stem to pluck off the valve locks once the valve spring is compressed. We offer several sizes that cover most automotive and motorcycle applications.
Pris inkl. moms 439,00 Kr
POW351008
Pro Valve Lock Tool - 11/32"
We all know how scary it can be to install or remove valve locks with just your fingers. One slip and you're looking at one painful injury. This new tool is definitely the best we've seen for performing this delicate task. To install keepers, compress valve spring, place valve locks on the magnetic stem of the tool, push body of tool over the locks, and position them on the valve stem and release the valve spring. To remove keepers, use the magnetic stem to pluck off the valve locks once the valve spring is compressed. We offer several sizes that cover most automotive and motorcycle applications.
Pris inkl. moms 439,00 Kr
POW351009
Pro Valve Lock Tool - 3/8"
We all know how scary it can be to install or remove valve locks with just your fingers. One slip and you're looking at one painful injury. This new tool is definitely the best we've seen for performing this delicate task. To install keepers, compress valve spring, place valve locks on the magnetic stem of the tool, push body of tool over the locks, and position them on the valve stem and release the valve spring. To remove keepers, use the magnetic stem to pluck off the valve locks once the valve spring is compressed. We offer several sizes that cover most automotive and motorcycle applications.
Pris inkl. moms 439,00 Kr
POW351015
Manual Valve Spring Compressor Heavy-Duty
At last there’s an easy-to-use Manual Valve Spring Compressor that can handle all those monster valve springs being used today. Our super-duty compressor is constructed of a welded steel, box-tubing frame and an over-center type clamping device that can compress any valve spring. The compressor arm slides up and down for adjustment and utilizes a locking pin for speed and ease of use. We also offer a base to hold the unit upright in order to use the compressor in conjunction with a mini spring tester. A small engine and motorcycle model is also available.
Pris inkl. moms 2,390.00 Kr
POW351049
Mini Spring Testers: 0-60 lb
If you don’t have the big bucks for a bench top spring tester or just need something more portable, this is the one to get. Our Hydraulic Mini Spring Testers are available in several ranges/increments and come complete with a rubber gauge protector and a recalibration feature. The handy hex design body can be placed in a vise, used with an arbor press, or with the addition of a flange, used in a drill press.
Pris inkl. moms 1,295.00 Kr
POW351050
Mini Spring Testers: 0-100 lb x 2 lb
If you don’t have the big bucks for a bench top spring tester or just need something more portable, this is the one to get. Our Hydraulic Mini Spring Testers are available in several ranges/increments and come complete with a rubber gauge protector and a recalibration feature. The handy hex design body can be placed in a vise, used with an arbor press, or with the addition of a flange, used in a drill press.
Pris inkl. moms 1,295.00 Kr
POW351055
Mini Spring Testers: 0-300 lb x 5 lb
If you don’t have the big bucks for a bench top spring tester or just need something more portable, this is the one to get. Our Hydraulic Mini Spring Testers are available in several ranges/increments and come complete with a rubber gauge protector and a recalibration feature. The handy hex design body can be placed in a vise, used with an arbor press, or with the addition of a flange, used in a drill press.
Pris inkl. moms 1,295.00 Kr
POW351060
Mini Spring Testers: 0-600 lb x 10 lb
If you don’t have the big bucks for a bench top spring tester or just need something more portable, this is the one to get. Our Hydraulic Mini Spring Testers are available in several ranges/increments and come complete with a rubber gauge protector and a recalibration feature. The handy hex design body can be placed in a vise, used with an arbor press, or with the addition of a flange, used in a drill press.
Pris inkl. moms 1,295.00 Kr
POW351065
Mini Spring Testers: 0-1000 lb x 20lb
If you don’t have the big bucks for a bench top spring tester or just need something more portable, this is the one to get. Our Hydraulic Mini Spring Testers are available in several ranges/increments and come complete with a rubber gauge protector and a recalibration feature. The handy hex design body can be placed in a vise, used with an arbor press, or with the addition of a flange, used in a drill press.
Pris inkl. moms 1,295.00 Kr
POW351070
Mini Spring Tester - Drill Press Flange
If you don’t have the big bucks for a bench top spring tester or just need something more portable, this is the one to get. Our Hydraulic Mini Spring Testers are available in several ranges/increments and come complete with a rubber gauge protector and a recalibration feature. The handy hex design body can be placed in a vise, used with an arbor press, or with the addition of a flange, used in a drill press.
Pris inkl. moms 229,00 Kr
POW351319
Spring Seat Cutter 1.320" O.D.
Most high performance engines require larger than stock diameter valve springs. Our Spring Seat Cutters allow you to machine the spring seats using an ordinary hand drill. We even offer seat cutters to accommodate the spring seat cups that are so widely used today (Note: all seat cutters cut to .630" inside diameter). Our Valve Guide Cutters are designed to shorten the valve guide boss for high lift cams, and also reduce the outside diameter to accept triple springs and/or aftermarket valve seals. Each tool utilizes our Interchangeable Arbors, which are sold separately, so order the one that matches your valve stem diameter.
Pris inkl. moms 639,00 Kr
POW351320
Spring Seat Cutter 1.440" O.D
Most high performance engines require larger than stock diameter valve springs. Our Spring Seat Cutters allow you to machine the spring seats using an ordinary hand drill. We even offer seat cutters to accommodate the spring seat cups that are so widely used today (Note: all seat cutters cut to .630" inside diameter). Our Valve Guide Cutters are designed to shorten the valve guide boss for high lift cams, and also reduce the outside diameter to accept triple springs and/or aftermarket valve seals. Each tool utilizes our Interchangeable Arbors, which are sold separately, so order the one that matches your valve stem diameter.
Pris inkl. moms 589,00 Kr
POW351325
Spring Seat Cutter 1.550" O.D.
Most high performance engines require larger than stock diameter valve springs. Our Spring Seat Cutters allow you to machine the spring seats using an ordinary hand drill. We even offer seat cutters to accommodate the spring seat cups that are so widely used today (Note: all seat cutters cut to .630" inside diameter). Our Valve Guide Cutters are designed to shorten the valve guide boss for high lift cams, and also reduce the outside diameter to accept triple springs and/or aftermarket valve seals. Each tool utilizes our Interchangeable Arbors, which are sold separately, so order the one that matches your valve stem diameter.
Pris inkl. moms 589,00 Kr
POW351330
Spring Seat Cutter 1.580" O.D. (For use with cup)
Most high performance engines require larger than stock diameter valve springs. Our Spring Seat Cutters allow you to machine the spring seats using an ordinary hand drill. We even offer seat cutters to accommodate the spring seat cups that are so widely used today (Note: all seat cutters cut to .630" inside diameter). Our Valve Guide Cutters are designed to shorten the valve guide boss for high lift cams, and also reduce the outside diameter to accept triple springs and/or aftermarket valve seals. Each tool utilizes our Interchangeable Arbors, which are sold separately, so order the one that matches your valve stem diameter.
Pris inkl. moms 589,00 Kr
POW351335
Spring Seat Cutter 1.680" O.D. (For use with cup)
Most high performance engines require larger than stock diameter valve springs. Our Spring Seat Cutters allow you to machine the spring seats using an ordinary hand drill. We even offer seat cutters to accommodate the spring seat cups that are so widely used today (Note: all seat cutters cut to .630" inside diameter). Our Valve Guide Cutters are designed to shorten the valve guide boss for high lift cams, and also reduce the outside diameter to accept triple springs and/or aftermarket valve seals. Each tool utilizes our Interchangeable Arbors, which are sold separately, so order the one that matches your valve stem diameter.

Pris inkl. moms 589,00 Kr
POW351340
Spring Seat Cutter 1.740" O.D. (For use with cup)
Most high performance engines require larger than stock diameter valve springs. Our Spring Seat Cutters allow you to machine the spring seats using an ordinary hand drill. We even offer seat cutters to accommodate the spring seat cups that are so widely used today (Note: all seat cutters cut to .630" inside diameter). Our Valve Guide Cutters are designed to shorten the valve guide boss for high lift cams, and also reduce the outside diameter to accept triple springs and/or aftermarket valve seals. Each tool utilizes our Interchangeable Arbors, which are sold separately, so order the one that matches your valve stem diameter.
Pris inkl. moms 589,00 Kr
POW351341
Valve Guide Cutter .446" (For triple springs)
Most high performance engines require larger than stock diameter valve springs. Our Spring Seat Cutters allow you to machine the spring seats using an ordinary hand drill. We even offer seat cutters to accommodate the spring seat cups that are so widely used today (Note: all seat cutters cut to .630" inside diameter). Our Valve Guide Cutters are designed to shorten the valve guide boss for high lift cams, and also reduce the outside diameter to accept triple springs and/or aftermarket valve seals. Each tool utilizes our Interchangeable Arbors, which are sold separately, so order the one that matches your valve stem diameter.
Pris inkl. moms 589,00 Kr
POW351342
Valve Guide Cutter .485" (For triple springs)
Most high performance engines require larger than stock diameter valve springs. Our Spring Seat Cutters allow you to machine the spring seats using an ordinary hand drill. We even offer seat cutters to accommodate the spring seat cups that are so widely used today (Note: all seat cutters cut to .630" inside diameter). Our Valve Guide Cutters are designed to shorten the valve guide boss for high lift cams, and also reduce the outside diameter to accept triple springs and/or aftermarket valve seals. Each tool utilizes our Interchangeable Arbors, which are sold separately, so order the one that matches your valve stem diameter.
Pris inkl. moms 589,00 Kr
POW351345
Valve Guide Cutter .530" (For standard teflon seals)
Most high performance engines require larger than stock diameter valve springs. Our Spring Seat Cutters allow you to machine the spring seats using an ordinary hand drill. We even offer seat cutters to accommodate the spring seat cups that are so widely used today (Note: all seat cutters cut to .630" inside diameter). Our Valve Guide Cutters are designed to shorten the valve guide boss for high lift cams, and also reduce the outside diameter to accept triple springs and/or aftermarket valve seals. Each tool utilizes our Interchangeable Arbors, which are sold separately, so order the one that matches your valve stem diameter.
Pris inkl. moms 589,00 Kr
POW351350
Valve Guide Cutter .625" (For stock diameter seals)
Most high performance engines require larger than stock diameter valve springs. Our Spring Seat Cutters allow you to machine the spring seats using an ordinary hand drill. We even offer seat cutters to accommodate the spring seat cups that are so widely used today (Note: all seat cutters cut to .630" inside diameter). Our Valve Guide Cutters are designed to shorten the valve guide boss for high lift cams, and also reduce the outside diameter to accept triple springs and/or aftermarket valve seals. Each tool utilizes our Interchangeable Arbors, which are sold separately, so order the one that matches your valve stem diameter.
Pris inkl. moms 589,00 Kr
POW351370
Arbor/Pilot for Cutters - 5/16" Diameter
For use with Powerhouse® Spring Seat Cutters and Valve Guide Cutters.
Pris inkl. moms 195,00 Kr
POW351380
Arbor/Pilot for Cutters - 11/32" Diameter
For use with Powerhouse® Spring Seat Cutters and Valve Guide Cutters.
Pris inkl. moms 195,00 Kr
POW351390
Arbor/Pilot for Cutters - 3/8" Diameter
For use with Powerhouse® Spring Seat Cutters and Valve Guide Cutters.
Pris inkl. moms 195,00 Kr
POW351530
Indicator Bracket For Rimac Spring Tester
Here’s a great tool to help make your life easier when using a Rimac Spring Tester. The bracket mounts to the spring tester shaft and allows you to install a dial indicator (not included) to measure spring height to .001". This is much easier than trying to read the steel rule scale that comes mounted to the spring tester from the factory. Our kit also includes a 1 1/2" standard and a 2" dial indicator extension tip.

Pris inkl. moms 395,00 Kr
POW360067
0-250 lb x 1 lb Rimac Spring Tester
Rimac set the standard back in 1929 when they introduced this unit, and they’re still the industry leader today. These bench top hydraulic testers are a sure way to check spring height versus spring pressure, and we stock all the sizes/ranges available. All models will handle springs up to 2" diameter and 4 1/2" free length, so they’re useful for much more than just checking valve, transmission and clutch springs. We highly recommend the purchase of the test spring, as you will be able to test and recalibrate your unit in the field.
Pris inkl. moms 9,995.00 Kr
POW360068
0-350 lb x 1 lb Rimac Spring Tester
Rimac set the standard back in 1929 when they introduced this unit, and they’re still the industry leader today. These bench top hydraulic testers are a sure way to check spring height versus spring pressure, and we stock all the sizes/ranges available. All models will handle springs up to 2" diameter and 4 1/2" free length, so they’re useful for much more than just checking valve, transmission and clutch springs. We highly recommend the purchase of the test spring, as you will be able to test and recalibrate your unit in the field.
Pris inkl. moms 9,995.00 Kr
POW360069
0-500 lb x 2 lb Rimac Spring Tester
Rimac set the standard back in 1929 when they introduced this unit, and they’re still the industry leader today. These bench top hydraulic testers are a sure way to check spring height versus spring pressure, and we stock all the sizes/ranges available. All models will handle springs up to 2" diameter and 4 1/2" free length, so they’re useful for much more than just checking valve, transmission and clutch springs. We highly recommend the purchase of the test spring, as you will be able to test and recalibrate your unit in the field.
Pris inkl. moms 9,995.00 Kr
POW360070
0-1000 lb x 5 lb Rimac Spring Tester
Rimac set the standard back in 1929 when they introduced this unit, and they’re still the industry leader today. These bench top hydraulic testers are a sure way to check spring height versus spring pressure, and we stock all the sizes/ranges available. All models will handle springs up to 2" diameter and 4 1/2" free length, so they’re useful for much more than just checking valve, transmission and clutch springs. We highly recommend the purchase of the test spring, as you will be able to test and recalibrate your unit in the field.
Pris inkl. moms 9,995.00 Kr
POW360071
0-125 lb x 1 lb Rimac Spring Tester
Rimac set the standard back in 1929 when they introduced this unit, and they’re still the industry leader today. These bench top hydraulic testers are a sure way to check spring height versus spring pressure, and we stock all the sizes/ranges available. All models will handle springs up to 2" diameter and 4 1/2" free length, so they’re useful for much more than just checking valve, transmission and clutch springs. We highly recommend the purchase of the test spring, as you will be able to test and recalibrate your unit in the field.

Pris inkl. moms 9,995.00 Kr
POW360075
Rimac Digital Spring Tester: 0-1200lb
Rimac has produced the industry standard for spring testers for many years. Now we offer the accurate and reliable Rimac Spring Tester in a high-tech, digital format. It features a backlit LCD window that displays force in .1 increments and height in .01 increments. Other useful functions include last reading memory, pass-fail settings and a 0 to 1200lb range. The rugged cast aluminum housing has a drilled base plate for bench mounting. Uses one 9 volt battery (included).
Pris inkl. moms 10,995.00 Kr
POW360095
Calibrated Test Spring
Calibrated Test Spring.
For use with spring testers.
Pris inkl. moms 285,00 Kr